機械制造工藝及設備英文簡歷

時間：2025-01-21 12:25:21 玉華簡歷我要投稿

相關推薦

機械制造工藝及設備英文簡歷（通用8篇）

　　光陰迅速，一眨眼就過去了，我們很快就要開啟找工作的生活，此時此刻需要開始寫簡歷了哦。相信寫簡歷是一個讓許多人都頭痛的問題，以下是小編整理的機械制造工藝及設備英文簡歷，供大家參考借鑒，希望能夠有所幫助!

機械制造工藝及設備英文簡歷（通用8篇）

　　機械制造工藝及設備英文簡歷 1

　　Name Chen wei(Owen)

　　Sex Male

　　Data of Birth 1986.11

　　Health very good

　　Age20

　　Political Identity Chinese Communist

　　Academy School of Mechanical Science and Eengineering of HUST Class Class 0408 of Machine Design Manufacturing and Automation

　　Contact

　　e-mail：

　　personal website：

　　Individual experience in university

　　About study

　　1、As a frosh，I got a grade of 89.361 in the academic year, top three of more than 360 students. As a result, I got a prize named “Study Excellence Scholarship”, and a honor named “Special Prepotency”

　　2、According to prescript on “Special Prepotency”, I followed professor Pen，Fangyu studying knowledge about Numerical Control. What’s more, I’ve passed an examination which was aimed at senior students, with a satisfying grade.

　　3、As a sophomore, I entered mathematical modeling study group of our academy, following professor Gao Liang study math. I got a second-class award of math modeling competition, and I take part in “High Education Cup” math modeling competition.

　　4、As a sophomore, I got a grade of 86.52 with the fifteenth place in my major. Again, I got “Study Excellence Scholarship”.

　　5、As a beginning of my third year, I’m getting down to dealing with some research about curve programming following professor Pen.

　　6、Till now, I’ve passed CET-4 and CET-6, also passed the National Computer Rank Examination(Grade 2)

　　About student job

　　1、As a freshman, during the drill time ,I was appointed as vice second lieutenant.

　　2、In the first semester, I occupied the monitor of our class. I was honored as “Excellent Student Cadre”, “Tri-excellent Student”. And my class was honored as “Academy Good Class”.

　　3、As a sophomore, I occupied undersecretary of student union and then president of student union. Again,I was honored as “Excellent Student Cadre”.

　　About society experience

　　1、I’m always engaging into part-time job, result in abundant experience.

　　2、I’ve attended the competition named“Survive Challenge Competition ”，and got a satisfying result.

　　3、I took actively part in society practice, investigated the status of “New Country Construction” in Ganzhou City , Jiang Xi Province.

　　Others

　　I once took part in the debate competition in my grades, and got the first prize along

　　with the honor “The Best Debater”.

　　機械制造工藝及設備英文簡歷 2

　　個人基本信息

　　Name: Alice Liu

　　Gender: Female

　　Residence: Guangzhou, Nanhai, Foshan

　　Telephone:

　　E-mail:

　　教育背景

　　Education: Bachelor of Mechanical Engineering, Guangdong University of Technology (1997.9 - 2001.6)

　　Courses: Mechanical Design, Manufacturing Processes, Materials Science, CAD/CAM

　　工作經驗

　　Company: Hwa Tai Precision Mould Ltd. (Mattel)

　　Position: Production Engineer

　　Duration: 2005 - Present

　　Responsibilities:

　　Design and develop mechanical components for new and existing products

　　Conduct analysis and simulation to optimize designs and ensure product performance meets customer requirements

　　Develop and implement test plans to validate product designs and ensure compliance with industry standards

　　Participate in the selection and evaluation of suppliers to ensure quality and cost-effectiveness of materials and components

　　Skilled with MS Office, AutoCAD, SolidWorks, Pro/E Wildfire, and Photoshop

　　技能和語言能力

　　Languages: CET-4 (good English written and spoken)

　　Computer Skills: Skilled with MS Office, AutoCAD, SolidWorks, Pro/E Wildfire, Photoshop

　　機械制造工藝及設備英文簡歷 3

　　Name:

　　Gender: Female

　　Date of birth: 1972-02-16

　　Mouth: Jiangsu

　　The current city: Shanghai City

　　Work experience: five years

　　The current annual salary: 5-6 million yuan

　　Mobile phone:

　　Residential address:

　　Self evaluation

　　5 years working experience in mechanical design, by CET-6. Pro-E, familiar with AutoCAD, Solidworks and Office, familiar with the process, can be engaged in the design and development and project management.

　　Job intention

　　Target industry: Machinery / equipment / instrument / heavy industry, industrial automation, automobile and spare parts, petroleum / chemical / mineral / Geology

　　Target position: Mechanical Engineer

　　Expectations: Shanghai City

　　Expected salary: salary welfare needs to fill, generally relatively safe negotiable

　　Time: how long can the arrival of new jobs

　　Work experience

　　20xx/07 now

　　Industry: Machinery / equipment / heavy industry

　　Department of Mechanical Design Engineer

　　Main responsibilities

　　1 by the individuals responsible for project, master project schedule, assist business personnel to understand customer needs, design fixture, fixture, equipment modification and field surveying and mapping parts, including assembly drawing, part drawing, BOM list, assist purchasing staff.

　　2 by the individuals responsible for project, master project schedule.

　　3 customers are Shanghai GM, Shanghai Volkswagen, Shanghai Natiefu, Wuxi BOSCH, Wuhu United States, Kunshan and Hangzhou etc. universal Fuji.

　　20xx/06 20xx/06: Shanghai Keepahead ultrasonic equipment Co., Ltd.

　　Industry: Machinery / equipment / heavy industry

　　Department of Mechanical Design Engineer

　　Main responsibilities:

　　1 responsible for the project, including equipment assembly and parts production drawings, outsourcing list, pipeline map, assist the purchasing staff to support business personnel, at the same time tracking solution occurs processing manufacturing and assembly debugging problems, and through customer acceptance, and write instructions, sometimes also translated the equipment specifications (export in the English translation).

　　2 the design of automatic ultrasonic cleaning equipment automatic mechanical arm, through the tunnel drying equipment, automatic high pressure spray, ultrasonic cleaning, wind drying (with the netbelt) and other non-standard equipment.

　　/10 20xx/12: Suzhou hongly mould machinery Co. ltd.;

　　Industry: Machinery / equipment / heavy industry

　　Technical department technician

　　Main responsibilities:

　　The preparation process, and according to the 2D drawings of Singapore engineer design, using Cimtron three-dimensional modeling, and translation of faxes and E-mail. Our products are stainless steel mould of glass.

　　Project experience

　　20xx/06 20xx/07: body machining fixture

　　Development tools: Pro-e, AutoCAD

　　Project Description: the fixture fixture for machining workpiece machining center, to the workpiece through the lateral expansion clamping device and the fixing plate, cutting through the spring pin to locate the center hole, take through the length of axis elliptical groove turntable mechanism to realize workpiece.

　　Responsibility description: responsible for the design of parts and assembly plans, production schedule, follow up the progress, solve the problems in the process of production and assembly.

　　20xx/12 20xx/01: a hole position check out

　　Development tools: Pro-e, AutoCAD

　　Project Description: the detector used for detecting the position degree of casting hole, products will be placed on the bottom position through a pin to detect the position of the workpiece, the detection position of the other inclined hole made reference plate and pin assembly of the handheld, seized by CMM, if not in the tolerance range of customer requirements in (+ 0.03), need to adjust.

　　Responsibility description: Design of parts and assembly plans, production schedule, track progress, solve problems, adjust the fixture to meet customer requirements in the tolerance range.

　　20xx/04 - 20xx/06: automatic high-pressure spray, ultrasonic cleaning, wind drying equipment production line

　　Development tools: AutoCAD

　　Project Description: this production line is used for cleaning and drying of stamping aluminum, steel mesh belt through the motor drive transmission of the workpiece, the first workpiece feeding section, the first and the two or three position is medium pressure spray, fourth, five or six position is the high-pressure spray, through high pressure pump and high pressure spray system, air knife with seventh air compressor station the water cut is eighth station, tunnel oven, final workpiece material.

　　Responsibilities: assist business personnel to understand customer needs, design and manufacture of the assembly and parts diagram, communication and electrical engineers, support the procurement staff, tracking the progress of solving the production problem, initial customer acceptance records of customer comments, until final acceptance by the customer.

　　Education and training

　　1994/09 1998/06: of Wuhan University of science and technology of metallurgical mechanical design and manufacturing automation degree

　　Certificate

　　1998/06 masters degree certificate

　　/09 passed the university English six levels

　　Language ability: English: good

　　機械制造工藝及設備英文簡歷 4

　　Name:

　　Date of Birth:

　　Contact Information:

　　Email:

　　Phone:

　　Address:

　　Objective

　　Highly skilled and motivated Mechanical Engineer with extensive experience in mechanical manufacturing processes and equipment seeking a challenging position in a reputable company to utilize my expertise and contribute to the organizations success.

　　Education

　　Bachelor of Science in Mechanical Engineering

　　[University Name], [City, Country]

　　Graduated: [Month, Year]

　　Master of Science in Manufacturing Engineering

　　[University Name], [City, Country]

　　Graduated: [Month, Year]

　　Professional Experience

　　Mechanical Engineer

　　[Company Name], [City, Country]

　　[Month, Year] – Present

　　Designed and optimized manufacturing processes to improve production efficiency by 20%.

　　Developed and implemented quality control procedures to ensure product compliance with industry standards.

　　Conducted feasibility studies for new equipment installations, resulting in cost savings of $1 million.

　　Collaborated with cross-functional teams to troubleshoot and resolve equipment malfunctions.

　　Trained and mentored junior engineers on mechanical manufacturing processes and equipment operation.

　　Production Supervisor

　　[Previous Company Name], [City, Country]

　　[Month, Year] – [Month, Year]

　　Supervised daily operations of the manufacturing floor, ensuring timely production and delivery of products.

　　Implemented lean manufacturing principles to reduce waste and improve process flow.

　　Conducted regular equipment maintenance and repairs, minimizing downtime.

　　Monitored production metrics and implemented improvements to meet targets.

　　Coordinated with suppliers and vendors for equipment parts and materials.

　　Skills

　　Proficient in CAD/CAM software (e.g., SolidWorks, AutoCAD, CATIA)

　　Experienced in machining processes (e.g., milling, turning, grinding)

　　Knowledge of quality control techniques and standards (e.g., ISO 9001, Six Sigma)

　　Familiar with industrial automation and robotics (e.g., PLC programming, robotic arm operation)

　　Strong problem-solving and analytical skills

　　Excellent communication and teamwork abilities

　　Certifications

　　Certified Mechanical Engineer (CME)

　　Six Sigma Green Belt

　　ISO 9001 Lead Auditor

　　Projects

　　Automated Assembly Line Design

　　Led a team to design and implement an automated assembly line for a automotive parts manufacturer, resulting in a 30% increase in production capacity.

　　CNC Machine Retrofit

　　Retrofitted an existing CNC machine with new controls and software, improving accuracy and reducing cycle time by 15%.

　　Languages

　　English (Fluent)

　　[Other Language] (Conversational)

　　References

　　Available upon request.

　　機械制造工藝及設備英文簡歷 5

　　Name: John Smith

　　Contact Information:

　　LinkedIn:

　　Objective:

　　Seeking a challenging position in Mechanical Manufacturing Processes and Equipment, utilizing my extensive experience and skills to contribute to the success of a dynamic company.

　　Education:

　　Bachelor of Science in Mechanical Engineering, XYZ University, 2015

　　Minor in Manufacturing Engineering, XYZ University, 2015

　　Work Experience:

　　Mechanical Engineer, ABC Manufacturing, 2015-Present

　　Designed and implemented manufacturing processes for precision machinery.

　　Conducted machine setup, troubleshooting, and maintenance.

　　Collaborated with cross-functional teams to improve production efficiency and quality.

　　Utilized CAD/CAM software for product design and prototyping.

　　Skills:

　　Proficient in CAD/CAM software (SolidWorks, AutoCAD)

　　Experienced with CNC machining and robotics

　　Strong analytical and problem-solving skills

　　Excellent teamwork and communication abilities

　　Certifications:

　　Certified SolidWorks Professional

　　Six Sigma Green Belt

　　機械制造工藝及設備英文簡歷 6

　　Name: Jane Doe

　　Contact Information:

　　LinkedIn:

　　Objective:

　　To obtain a position in Manufacturing Engineering, focusing on mechanical processes and equipment, where I can apply my technical expertise and leadership skills.

　　Education:

　　Master of Science in Manufacturing Engineering, DEF College, 2018

　　Bachelor of Science in Mechanical Engineering, DEF College, 2016

　　Work Experience:

　　Manufacturing Engineer, GHI Industries, 2018-Present

　　Led projects to optimize manufacturing processes and reduce costs.

　　Conducted training sessions for new employees on machinery operation and safety.

　　Monitored and analyzed production data to identify areas for improvement.

　　Worked closely with suppliers to ensure material quality and timely delivery.

　　Skills:

　　Expertise in lean manufacturing and process improvement

　　Familiar with PLC programming and automation systems

　　Strong project management and leadership abilities

　　Effective time management and multitasking skills

　　Certifications:

　　Certified Six Sigma Black Belt

　　PLC Programming Certification

　　機械制造工藝及設備英文簡歷 7

　　Name: Michael Brown

　　Contact Information:

　　LinkedIn:

　　Objective:

　　Passionate about mechanical manufacturing processes and equipment, seeking a role that allows me to apply my technical knowledge and creativity to drive innovation.

　　Education:

　　Bachelor of Engineering in Mechanical Engineering, JKL Institute, 2017

　　Diploma in Advanced Manufacturing Technology, JKL Institute, 2016

　　Work Experience:

　　Junior Manufacturing Engineer, MNO Corp, 2017-Present

　　Assisted in the development of new manufacturing processes and equipment.

　　Conducted research on emerging technologies to enhance production capabilities.

　　Prepared technical documentation and reports for internal and external stakeholders.

　　Supported the maintenance team in troubleshooting and repairing machinery.

　　Skills:

　　Skilled in 3D modeling and simulation software (SolidEdge, CATIA)

　　Knowledgeable about ISO quality standards and compliance

　　Good interpersonal and customer service skills

　　Adaptable and quick learner

　　Certifications:

　　Certified SolidEdge Associate

　　ISO 9001:2015 Internal Auditor

　　機械制造工藝及設備英文簡歷 8

　　Name: Emily Davis

　　Contact Information:

　　LinkedIn:

　　Objective:

　　Dedicated and motivated Manufacturing Engineer with a focus on mechanical processes and equipment, seeking to contribute to a companys growth and innovation.

　　Education:

　　Master of Engineering in Manufacturing Systems, PQR Academy, 2020

　　Bachelor of Engineering in Mechanical Engineering, PQR Academy, 2018

　　Work Experience:

　　Manufacturing Engineer Intern, RST Ltd, 2019-2020

　　Assisted in the optimization of manufacturing processes and reduction of waste.

　　Participated in the implementation of new machinery and equipment.

　　Supported the quality control team in ensuring product compliance with standards.

　　Gathered and analyzed data to identify process inefficiencies.

　　Skills:

　　Experienced with statistical process control (SPC) tools

　　Familiar with ERP and MRP systems